 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 61-136/REGHB7C-B01/ET Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions Due to the package design, 61-136 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Device Selection Guide Chip Type RE GH B7 Material AlGaInP InGaN InGaN Emitted Color Lens Color Brilliant Red Brilliant Green Blue Water Clear Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 1 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Package Outline Dimensions R+ -R G- +G B+ -B Polarity Recommend solding pad design Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 2 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Symbol VR RE Forward Current IF GH B7 RE Peak Forward Current (Duty 1/10 @ 1KHZ) IFP GH B7 RE Power Dissipation Pd GH B7 RE Thermal resistance (Junction-Air) RthJ-A GH B7 RE Thermal resistance (Junction-Lead) RthJ-L GH B7 Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ESD Topr Tstg Tsol Rating 5 30 30 30 120 110 110 80 110 110 230 240 240 150 160 160 150 -40 ~ +85 -40~ +90 V /W /W mW mA mA Unit V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 3 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Electro-Optical Characteristics (Ta=25) Parameter Symbol RE Luminous Intensity Iv GH B7 RE Luminous Flux V GH B7 Viewing Angle 21/2 RE Peak Wavelength p GH B7 RE Dominant Wavelength d GH B7 RE Spectrum Radiation Bandwidth GH B7 RE Forward Voltage Min. 500 700 110 ----------------------------619.5 519.5 450.0 ------------1.8 3.0 3.0 ------------- Typ. ------------1.75 2.87 0.58 120 632 518 468 ------------20 35 35 ------------------------- Max. 700 1300 210 ----------------------------631.5 530.5 460.5 ------------2.2 3.4 3.4 10 50 50 Unit Condition IF=20mA mcd IF=20mA IF=20mA lm IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA VF GH B7 RE V IF=20mA Reverse Current IR GH B7 A VR=5V Notes: 1. Tolerance of Luminous Intensity 10% 2. Tolerance of Dominant Wavelength 1 nm 3. Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 4 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Bin Range Of Luminous Intensity Symbol RE Bin Code R1 R2 G0 Min. Max. Unit Condition 500 600 700 1000 110 160 600 700 1000 1300 160 210 mcd IF =20mA Iv GH G1 B7 B1 B2 Bin Range Of Dominant Wavelength Symbol Bin Code RE Min. Max. Unit Condition R1 R2 G0 G1 B0 B1 d GH B7 619.5 625.5 519.5 525.5 450.0 455.0 625.5 631.5 525.5 530.5 455.0 460.5 nm IF =20mA Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1 nm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 5 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Bin Range of Forward Voltage Symbol RE Bin Code VR0 VR1 VG0 Min. Max. Unit Condition 1.80 2.00 3.00 3.20 3.40 3.00 3.20 2.00 2.20 3.20 3.40 3.60 3.20 3.40 V IF =20mA VF GH VG1 VG2 VB1 B7 Notes: 1. Tolerance of Forward Voltage 0.1V VB2 Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 6 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V()=Standard eye response curve 100% Relative Intensity (%) B7 GH V() RE 50% 0% 400 450 500 550 600 650 700 Peak Wavelength (nm) Diagram characteristics of radiation: 20 30 40 50 View Angle 60 70 80 90 o o o o o o o o 10 o 0 o 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0.2 0 20 o Relative Intensity 60 40 View Angle o o 80 o Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 7 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Forward Current vs. Forward Voltage 100 Ta=25 Forward Current I F (mA) RE GH B7 10 1 1.7 2 2.3 2.6 2.9 3.2 3.5 3.8 Forward Voltage V F (V) Forward Current v.s. Ambient Temp. 50 40 IF (mA) 30 20 10 0 0 20 40 60 80 100 T (degree C) Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 8 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 9 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Carrier Tape Dimensions;Loaded quantity per reel 800 PCS/reel B G - R B G R Polarity Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 10 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 High Temperature / High Humidity * For each die Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 11 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 12 of 13 Prepared by: Forrest EVERLIGHT ELECTRONICS CO.,LTD. 61-136/REGHB7C-B01/ET 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 18-Sep-2006 Rev. 1 Page: 13 of 13 Prepared by: Forrest |
Price & Availability of 61-136-REGHB7C-B01-ET
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |